Double Wheelie Bin & Recycling Bin Store from Dorset Log Stores. Smarten up your outdoor area with these robust timber bin stores.
A duo of one
Wheelie Bin Store and one
Recycling Bin Store - a perfect solution to hide our ugly plastic wheelie bins and recycling boxes.
A single unit suitable for one plastic wheelie bin in one side and two or three recycling boxes in the other. This Bin Store has a solid internal wall and open floor for the Wheelie Bin section whilst the Recycling Box side has a timber bottom shelf and a removable mid-shelf (see images above).
Each store section has its own roof which you raise to access the plastic bins. The lid of the plastic wheelie bin, or lidded recycling caddy, can be attached to a lifting cord fixed into the roof so that only one-handed action is needed to raise both the store roof and the bin lid at the same time. If you needed to keep the roof open you can use the folding wooden arm housed just inside the frame.
Each roof and door has a painted steel D-handle, and each door has heavy duty galvanised hinges and a padlockable Brenton Bolt. The side panels and back panels have a 1cm gap between the timber to keep the unit well ventilated but still secure
Very well made from thick pressure treated Scandinavian redwood timber, built with decking screws, guaranteed against rot, it will last for many years without any preservative treatment required. Made in Dorset.
Double Bin & Recycling Box Store, external dimensions 86cm front to back; 122cm high; 155cm wide.
Please check your bin dimensions.As a guide, a 240 litre Plastic Wheelie Bin measures 73cm front to back x 105cm high x 58cm wide.Note:
Our Timber is pressure treated and warrantied against rot, fungal or insect attack for 15 years. This does NOT mean pressure treated timber is 'waterproof' nor will it prevent the natural swelling and shrinkage throughout the seasons but, it is suitable for life outdoors in all weathers. Swelling and shrinkage is perfectly natural with all timber. Although we build in tolerances to take account of this, you may have to slightly adjust the doors over time e.g. if the timber swells preventing the doors from closing properly. This is easily done by adjusting the hinges slightly to move the door position. We advise that maintenance is required for any timber products over the years and the application of a wood protector or clearsealer (not varnish) annually will keep it in good condition to help the timber last 15+ years.
base (where applicable), sides and back: 21mm planed Pressure Treated FSC Redwood boards Frame:
38mm x 38mm pressure treated FSC framing Fixtures:
Plated & Painted Decking Screws used throughout; Stainless Steel NailsGuarantee:
15 years against rot & fungal attackMade in
England by Dorset Log Stores
DELIVERY IS FREE to most mainland UK destinations (see our delivery page for delivery zones). Currently 2 week delivery time, we will email delivery date shortly after placing your order.
Delivery is made on a wooden pallet via Pallet Transport lorry. You can select above if you would like the stores to arrive flatpacked in panels (a good idea when access may be an issue) or partly assembled. Partly assembled means you would only need to put the roofs in place and make adjustments the door levels once in situ so that the bolt meets the bolt capture
. If Flatpacked then it arrives as several complete panels with full instructions and all screws needed for self assembly - only a cordless screwdriver required.
For pallet delivery details please see our Delivery Information page